FEATURED
You are browsing the archive.
Maclan Racing Announces MDP (Maclan Drift Performance) LiPo …
New from Maclan Racing are a pair of MDP (Maclan Drift Performance) LiPo Batteries. Specifically designed for hardcore drift action, the new MDP packs can help you raise your sideways game. Here are the highlights- * Ultimate choice for precision, power, and performance in RC drifting * MDP Graphene HV 2S 6400mAH & MDP ULCG Graphene HV 2S 4400mAH * Tailored specifically for [...]
- 11/7/2024
- 1:34 pm
- New Products
- By: Tim Mohr
RPM Rear Bumper Mount for the Traxxas XRT
New from RPM is a Rear Bumper Mount for the Traxxas XRT. This beefy bumper mount was designed to be much stronger than the stock part for those extreme bashing sessions. Check out these highlights- * Increased height (19mm) for extra strength * Thicker than stock (5.08mm) * Durable triple loop design where each side has three curves * Three zones of compression per [...]
- 11/6/2024
- 2:14 pm
- New Products
- By: Tim Mohr
Video – RC4WD 1982 Toyota Pickup Hard Body Set
The RC4WD crew has uploaded a 1982 Toyota Pickup Hard Body Set promotional video. The new RC4WD Toyota hard body set has impeccable scale realism and can be used for all sorts of custom builds. Watch below to get a close up look at the RC4WD Toyota, as well as finding out more about its scale features. The RC4WD 1982 Toyota [...]
Redcat Launches the MT-18 1/18 Monster Truck
Redcat used the backdrop of its SEMA 2024 booth to announce the release of its latest 1/18-scale model, the MT-18. Based on the popular Ascent-18, this tiny monster truck shares parts compatibility with its crawler cousin while showcasing some unique traits. The MT-18 features straight, solid axles to give it an appearance that’s in line with 1:1 monster trucks. It also [...]
- 11/6/2024
- 12:23 pm
- New Products
- By: Tim Gluth
MIP Announces 4.0mm & 5.0mm Gen 2 Speed Tips
New from the MIP crew are 4.0mm & 5.0mm Speed Tips. Some of you already know that a good 4.0 (#9214S) and 5.0 (#9215S) hex wrench will get a lot of use while wrenching on 5th scale/large scale trucks. Now the MIP crew is offering their beefy 4.0 and 5.0 in a Gen 2 version. Check out these highlights- * Easy [...]
- 11/5/2024
- 6:02 pm
- New Products
- By: Tim Mohr
Team Associated RC10 40th Anniversary Green Edition Kit
Just announced by Team Associated is the highly collectable RC10 40th Anniversary Green Edition Kit. The green edition of the classic RC10 is an alternate reproduction of Roger Curtis’s world championship-winning buggy design that helped change the landscape of rc. Here are the highlights- * Special green anodizing on chassis * IFMAR worlds style front knobby tires * Aluminum shock bodies * Chrome [...]
- 11/5/2024
- 3:25 pm
- Featured Posts
New Products - By: Tim Mohr
Tamiya To Re-Release The TB-05R Chassis Kit
The crew at Tamiya has announced the Re-Release of their TB-05R Touring Car Kit. This high-end shaft driven touring car is loaded with hop-ups to make it track ready, right out of the box. Check out these highlights- * Efficient shaft-driven 4WD chassis * Front or rear motor layouts * Fully bearing equipped * TRF super short, titanium coated race shocks * Carbon fiber reinforced [...]
Team Associated Teases New Touring Car
Over at Team Associated they are now teasing a new Touring Car Kit. Team Associated has been a player in the touring car game for decades, but has tended to be more dominant off-road, than on. Perhaps this new teaser, with the number 8 prominently displayed, with help put AE back on top of the touring car game. As [...]
- 11/5/2024
- 1:40 pm
- New Products
- By: Tim Mohr
GL Racing 1/28 Formula One Kit
Over at GL Racing they have announced a very trick 1/28 Formula One Kit. The crew at the Hong Kong based GL Racing have long been into the micro sized race scene and their new Formula One kit is one of the best we’ve seen in small scale. Check out these highlights- * 4 wheel independent suspension * LCG pushrod suspension front [...]
- 11/4/2024
- 7:10 pm
- New Products
- By: Tim Mohr
Teaser – Capo Racing Cub 3 1/18 Mini Tatra 8×8 Kit
Now being teased over at Capo Racing is the Cub 3 1/18 Mini Tatra 8×8 Kit. This all metal kit is fully 8 wheel drive and both front axles are used for steering. Capo Racing has been pushing the envelope of scale realism since their inception and their upcoming Cub 3 definitely does not disappoint for scale factor. Right now the [...]
- 11/4/2024
- 4:37 pm
- New Products
- By: Tim Mohr
Injora Brass & Aluminum Portal Axles for the Redcat Asce…
New from Injora are their front and rear Brass & Aluminum Portal Axles for the Redcat Ascent-18. These complete axles will give your 1/18-scale crawler a premium appearance overhaul and add down-low weight to keep your rig planted as you navigate gates. The main axle housings are made of machined aluminum, while the portal covers, diff covers, c-hubs, and steering links [...]
- 11/4/2024
- 1:39 pm
- New Products
- By: Tim Gluth
Carisma 1/10 Range Rover Custom SCA-1E 2.1 RTR
Now shipping from Carisma is the limited edition 1/10 Range Rover Custom SCA-1E 2.1 RTR. As Carisma’s licensing agreement with Jaguar Land Rover is about to expire at the end of 2024, this is a limited edition release to celebrate all their previous collaborations. With a hot looking scale accurate body, and Carisma’s highly capable SCA-1E 4wd chassis underneath, this [...]
- 11/4/2024
- 1:15 pm
- New Products
- By: Tim Mohr
-
JConcepts P2 Clear Body for the SWORKz S35-4 Evo
Now shipping from JConcepts is a P2 Series Clear Body for the SWORKz S35-4 Evo. Right now there are four SWORKz drivers in the top ten of the world 1/8th nitro buggy rankings, thus showing SWORKz is at the top of the 1/8th nitro buggy game. Thankfully JConcepts has all you new SWORKz drivers covered with this trick P2 series [...]
- 11/1/2024
- 6:17 pm
- New Products
- By: Tim Mohr
The Backyard – The 1:24 FMS Camel Trophy Trucks
Hey everyone and happy Friday! Welcome to November – start warming up the credit cards for all that holiday shopping! Last week I discussed a large scale crawler I’ve been working on, but this week I wanted to shift to the opposite end of the spectrum. Over the Summer, when the FMS FCX24M Land Rover Camel Trophy Edition 1:24 mini crawler trucks [...]
- 11/1/2024
- 5:16 pm
- The Backyard
- By: Doug
XRay Announces 2025 XB2 Buggy Kit
Over at XRay they have announced the 2025 edition of their XB2 Race Buggy Kit. The XB2 has been a winner since its inception and the 2025 edition is fully updated for even more speed and adjustability. Check out these highlights- * 2 Versions – Dirt or Carpet * Thinner 2.0mm aluminum one-piece chassis * Unified mid-length chassis balances rear traction & steering * [...]
- 11/1/2024
- 2:38 pm
- New Products
- By: Tim Mohr
