You are browsing the archive.
The RC4WD Trailfinder 2 LWB kit with the 1980 Toyota Land Cruiser FJ55 Lexan body has had some mixed reviews. RC4WD is known for scale hard bodies, so naturally people were taken back when they found out that the new FJ55 body was lexan. We were just as surprised when the rig arrived at the Big Squid RC office but [...]
Beat The Creek is held in the charming southern town of Maysville, Kentucky. The town is filled with beautiful landscapes, farmland, and of course the property of Joe and Sue Hauke. Joe and his family open up their private property to host Beat The Creek. If that doesn’t say Southern Hospitality, then I don’t know what will. I can deal [...]
The ROCHobby TYPE82E RTR 1/12 Beetle is one of FMS’s top scale rigs. Opening doors, hood, trunk, working fan belt, detailed interior, and the ability to switch from 2wd to 4wd along with a high and low gear adds up to a wicked scale rig. When our running video came out, I felt like the film could have been better. [...]
Axial Racing has released a new ready to run called the 1/10 Axial SCX10 III Base Camp, and it is a budget/entry level rig that will open up the doors to this wonderful hobby to all the newcomers while keeping the cost down. Will the Axial Base camp live up to its lineage, or will it be left by the [...]
Happy day in the Big Squid Shop! We recently received the ERNST Ultimate Hobby Stand and have some time to check it out to see what it has to offer. As long as I have been in the hobby, I have only recently started utilizing the help of pit mats and pit stands so when the Ultimate Hobby Stand from [...]
It has been a while since we have revisited the RC4WD Trailfinder 2 Back to The Trails Truck. Since getting the rig over the summer, the truck has had a few adventures. It’s made a trip to Kentucky, Horizon Fest, and USTE 2022. But with that much travel and wheel time on any rig will start to show no matter [...]
Mark your calendars for May 14th-15th. Big Squid RC will be invading Maysville Kentucky for the 7th annual Beat The Creek! For a few years now I have been trying to get to this event. As life would have it, something would come up and make it so I couldn’t attend. Not this year, along with myself the Scalin’ Squids [...]
The Element RC Knightrunner is back in the shop for its next round of BowHouse RC mods. This time around we installed the N2R Steering Rack for Element Enduro IFS v2, along with N2R Aluminum Steering Bell Cranks for Element Enduro IFS, and Bump Stops for Element Enduro IFS. If you are interested in doing the steering rack, I would [...]
Farm Truck 2 has been a killer rig so far. From its maiden voyage at USTE 2022, to the miles it has driven in Juicebox Off-Road Park, the truck still drives like its brand new. Haven’t even had any bugs to work out, but when you use a GCM Racing Cmax 2 Chassis, Holmes Hobbies Crawlmaster, and a REEFS RC [...]
From the Majestic shop of ScalerFab comes a beautiful set of Retro front and rear bumpers for the Axial Racing SCX10 iii Bronco. Our Bronco has not had an easy life since we received it. But after all the abuse it has taken, the rig is holding up strong with only cosmetic damage. Now that the little Squid has basically [...]
Frixion RC has popped up out of thin air it seems, carrying an impressive catalog of scale and performance hop ups. We got our hands on a set of 1” Braven Ironside Scale tires with the Alien Kompound from Frixion RC. The tires look great, so we pulled in our FMS Model Toyota Land Cruiser into the scale shop and [...]
Hello everyone and thanks for checking out this week’s Everybody’s Scalin’. last week we attended the sixth annual ULTIMATE SCALE TRUCK EXPO in Williston Florida. This was our 4th year attending and the event keeps getting bigger and better every year. So, while we work on getting the Shop back in order, take a look at the first round of [...]
Hello everyone, and welcome to this week’s Everybody’s Scalin’. With only a week until the Ultimate Scale Truck Expo we have been wrapping up our builds and getting ready to hit the road. While I was weathering the bed for Farm Truck 2, I looked over at the FMS Models Chevy K10 and figured it could use some aging. Now [...]
The Element Knightrunner is back on the scale shop loaded down with some upgrades from BowHouse RC. So far, our Knight runner has had the Knight Custom’s 3D printed interior and front wheel wells. Adding those parts make the Knightrunner body pop on a on the scale chart. Now that we have the look we want, it’s time for some [...]
A while ago I was watching one of REFFS RC live streams from a Hobby Town USA in Kennesaw GA. In that stream there was a build on the counter that caught my eye right away. After some back and forth I was put in contact with the builder, Brandon McCullough is the master mind behind this wicked rig he [...]