FEATURED
You are browsing the archive.
Injora Magnetic Body Mounting Kit for the FMS FCX18
New from Injora is a Magnetic Body Mount Kit (FCX18–06) for the FMS FCX18. While these 1/18-scale trail rigs and crawlers are incredibly detailed, swapping bodies around can be a bit of a chore. If you’d prefer to hot-swap bodies, this body mount kit might be worth taking a look at. Featuring aluminum frame mounts and strong magnets, this mounting kit [...]
- 5/23/2024
- 1:26 pm
- New Products
- By: Tim Gluth
H-Tech Custom Products Aluminum Rear Shock Tower for the Red…
New from H-Tech Custom Products is their Aluminum Rear Shock Tower for the 1/10-scale Redcat Ascent and Ascent Fusion. This upgrade item not only improves the durability of your crawler’s chassis, but it also offers an impressive amount of shock mounting positions to help you get the most out of your Ascent’s performance. Made of machined aluminum, H-Tech’s Rear Shock Tower [...]
- 5/21/2024
- 10:29 am
- New Products
- By: Tim Gluth
Injora Brass Rear Outer Portal Housing Set for the Redcat As…
New from Injora is their Brass Rear Outer Portal Housing Set (ASC18–05BK) for the Redcat Ascent-18. This machined brass upgrade adds 45g of weight to your 1/18-scale crawler, helping provide stability when tackling tricky lines. With its flat black finish and exposed brass accents, this chassis upgrade not only pumps up the performance but also the appearance of your Ascent-18. Included [...]
- 5/8/2024
- 10:46 am
- New Products
- By: Tim Gluth
Injora 370 Brushed Motor & Aluminum Transmission for the…
If you need more power for your 1/18-scale Traxxas TRX-4M, Injora has you covered. Their 370 Brushed Motor & Aluminum Transmission combo offers more than enough power for your trail adventures, plus plenty of “oomph” to tackle the trickiest of courses. Featuring an improved drag break and low-end performance (compared to the stock TRX-4M motor), this motor and transmission package also [...]
- 5/6/2024
- 11:35 am
- New Products
- By: Tim Gluth
Injora Brass Front Outer Portal Housings and Steering Knuckl…
Add down-low weight to the front of your Redcat Ascent-18 with Injora’ s Brass Front Outer Portal Housings and Steering Knuckle (ASC18–04BK) set. This machined brass upgrade adds over 40g of weight to your 1/18-scale rig, giving it more crawling traction and stability. Featuring a flat black finish and exposed brass accents, this chassis upgrade not only pumps up the performance [...]
- 5/2/2024
- 2:48 pm
- New Products
- By: Tim Gluth
Injora 21g Brass Skid Plate for the Redcat Ascent-18
Who’s ready to upgrade their Redcat Ascent-18? While Redcat themselves have released an array of upgrades for this 1/18-scale crawler, other aftermarket brands are getting in on the action, including Injora. One of their first upgrade options is a 21g Brass Skid Plate/Transmission Mount (ASC18–03B) that adds plenty of weight to the underside of your Ascent-18. Made of machined brass, this [...]
- 4/30/2024
- 11:46 am
- New Products
- By: Tim Gluth
Injora Brass High Clearance Lower Link Set for the TRX-4M Hi…
New from Injora is the Brass High Clearance Lower Link Set (#4M-97) for the Traxxas TRX-4M High Trail. Give your lifted Chevy or Ford more stability and even more clearance with these stylish brass lower suspension links. Designed to offer an improved approach angle compared to the stock links, these upgraded brass links also provide durability and additional weight to help [...]
- 4/29/2024
- 10:53 am
- New Products
- By: Tim Gluth
Injora Rolls Out its “ModuWheel” 1.3" Beadlock Whee…
As I look around my collection of R/C things, there’s one item that I see more of than anything else. Wheels. Big wheels, small wheels, wheels of just about every size. While I love havng a wide array of wheels to choose from for my fleet of radio-controlled vehicles, it would be nice if I could swap out certain aspects [...]
- 4/26/2024
- 9:58 am
- New Products
- By: Tim Gluth
Injora 4-piece Silicone Inserts for 62–64mm 1.0" Tire…
New from Injora are their 4-piece Silicone Inserts for 62–64mm 1.0" Tires (DGT-1064YE). If you want improved performance from your 1/24 or 1/18-scale R/C crawler, these tire inserts will help you achieve that with minimal effort. Made from silicone, these tire inserts feature the same flexibility benefits as foam but without the moisture-capturing, water-logging side effects. These inserts aren’t affected by [...]
- 4/25/2024
- 5:33 pm
- New Products
- By: Tim Gluth
Injora 1.0" Mud Paw M/T Tires for 1/24 & 1/18 Crawl…
New from Injora are their 1.0" Mud Paw M/T Tires for 1/24 and 1/18-scale R/C crawlers. Featuring a narrow width and a classic tread pattern design, these tires are sure to transform both the appearance and performance of your small-scale trail rig. Made from Injora’s super-soft and super-sticky S5 compound, these tires offer plenty of traction improvement over stock RTR tires. [...]
- 4/24/2024
- 11:48 am
- New Products
- By: Tim Gluth
Injora Brass Steering Knuckles and Counterweights for the TR…
New from Injora are their Brass Steering Knuckles and Counterweights for the Traxxas TRX-4M. While this isn’t the first time Injora has offered a set of brass steering knuckles for the popular 1/18-scale crawler, this option part does offer some benefits over its predecessor. Weighing in at 13g, these Brass Steering Knuckles feature threaded mounting holes that allow easy installation of [...]
- 4/23/2024
- 10:24 am
- New Products
- By: Tim Gluth
Injora Brass Adjustable/Clockable C-Hub Carriers for the TRX…
If you’re serious about the performance of your Traxxas TRX-4M, or you want the ability to fine-tune your 1/18-scale crawler, Injora’s Brass Adjustable/Clockable C-Hubs for the TRX-4M (#4M-05) might be worth checking out. Made from machined brass, these adjustable caster blocks can be rotated or “clocked” to the rear, allowing you to fine-tune steering and traction performance. Each C-Hub weighs 4g, [...]
- 4/18/2024
- 11:41 am
- New Products
- By: Tim Gluth
Injora 4-piece Silicone Inserts for 56–58mm 1.0" Tire…
The anti-foam revolution is rolling strong in the 1/10-scale crawler world, and you can now get the benefits of silicone tire inserts for your small-scale rigs. Injora has introduced their 4-piece Silicone Inserts for 56–58mm 1.0" Tires (DGT-1056YE). Made from silicone, these tire inserts feature the same flexibility benefits as foam but without the moisture-capturing, water-logging side effects. These inserts aren’t [...]
- 4/16/2024
- 10:40 am
- New Products
- By: Tim Gluth
Injora Sealed 30-Piece Bearing Kit for the Redcat Ascent-18
New from Injora is their 30-Piece, Sealed Bearing Kit (ASC18–01) for the Redcat Ascent-18. Easily upgrade the bearings on your small crawler for an improved trailing and crawling experience. These stainless steel bearings feature a sealed, dustproof design and are intended to reduce the rolling resistance of your 1/18-scale crawler. Redcat Ascent-18 Sealed Bearing Sizes and Quantities:(12) 3x6x2.5mm (4) 3.5x7x2.5mm (8) 4x8x3mm (4) 7x11x3mm (2) 8x12x3.5mmPriced [...]
- 4/11/2024
- 1:44 pm
- New Products
- By: Tim Gluth
Injora Stainless Steel Driveshafts for the Redcat Ascent-18
New from Injora is their Stainless Steel Driveshaft Set for the Redcat Ascent-18. Amp up the durability of your 1/18-scale crawler with this stylish upgrade item. Featuring stainless steel materials, these front and rear driveshafts feature a bright silver finish with the Injora logo etched into the sleeved shaft. All necessary installation hardware is included, making for a quick and easy [...]
- 4/3/2024
- 4:33 pm
- New Products
- By: Tim Gluth
