You are browsing the "Team Associated" category archive.
JConcepts has just announced a new Anti-Roll Bar Kit for the very popular Team Associated B4/T4/SC10 vehicles. Why might a basher need an anti-roll bar kit? Anti-roll bars come in very handy on smooth high bite surfaces, they help keep your vehicle flat in the corners, thus increasing corner speed while making your vehicles easier to drive. The kit comes with [...]
There is huge news out of the Team Associated camp- they have just announced that they are doing a re-release of the original RC10 buggy. The original RC10 was a legendary buggy that got countless people into the hobby and revolutionized the sport of rc racing. The new limited edition RC10 Classic sports the part number of #6001, [...]
Team Associated has announced new drift tires for their Apex Touring Car. The new Associated pre-mounted drift tires also fit on any touring car with a standard 12mm hex. If your big thing is going slide-ways these should be worth a look. Part number for just the tires is #31445, while the part number for the pre-mounts is #31440. Both are [...]
The crew over at Reedy have a new Lipo battery ready to power your 8th scale buggy or truggy. The latest Reedy Lipo is 4S (14.8 volts) and rated for 4600 mah of capacity to provide long run-times. The new Reedy is stated to handle 55C worth of continuous discharge and be capable of a 2C charge rate (9.2 amps). [...]
Associated has just announced their new line-up of XP Digital Servo’s. The new XP servo’s come with O-rings to help them be water-resistant, they also come with metal gears for durability (on MG models). In all there are 5 different models ranging in torque from 52 to 138 oz/inch. Speed on all the new digital XP servo’s is .15 (all [...]
One of the longest proven buggy platforms on the market is the legendary RC10B4. The newest version of the B4 is the RC10B4.2 Race Spec. This is a brushless RTR buggy that includes several upgrades over previous versions, and comes with waterproofing to appeal to bashers. The RC10B4.2 RS is low to the ground for great corner speed and there [...]
The Associated T4 platform lives on, the latest version being the T4.2RS Brushless RTR. The T4.2RS has received some updates like an Associated XP 2.4GHz radio, an XP digital metal gear servo, and waterproof components such as the speed controller and receiver box. With big power from a 3300kv motor the T4.2RS should be a nice bash machine. The new part [...]
The new Silencer body for the Associated RC8.2 was designed for optimal performance on high speed tracks. A narrow cockpit area gives better access to the fuel tank and helps airflow back to the engine head. Dual channeling rear air escape and overall low profile also aid in handling. Part number on the JConcepts Silencer for the Associated RC8.2 is #0256 [...]
Associated’s new basher line, the Qualifier Series, keeps getting bigger. The latest vehicle to be announced is the Rival Mini Monster RTR. The Rival Mini Monster comes with a 2.4 Ghz radio system, four oil filled shocks, 370 brushed motor, and 6 cell Ni-MH battery pack. It’s an RTR, so it is ready to drive right out of the box, and [...]
The latest member of the Qualifier Series from Team Associated is the Apex Mini Touring RTR. The Apex Mini is based off the older RC18 series and comes in two different color schemes. Some of the primary features include- * 18th scale 4wd * 2.4 GHz radio system * Brushed 370 sized motor * 6 cell Ni-MH battery and charger Part number for the Apex [...]
It’s spring, time to bust those nitro burners back out again and Associated has announced their new RC8.2 Race-Spec RTR buggy. It’s an 8th scale off-roader that should not only be great at the track, but also great fun at your local bash area. There are a host of upgrades to the new 8.2 version, and it comes with all the [...]
JConcepts now gives all you Associated SC10B drivers a choice with the release of their new Escape body. The Escape body has lots of high performance features- narrow design, a reversed hood scoop, raised numbers plates, and rear fender skirts help it perform as good as it looks. The part number on the new JConcepts body is #0257 and they have [...]
A brand spanking new from Team Associated? Yes indeed, all you long time Associated fans can rejoice, they’ve heard your call for an uber basher and here it is- the 8th scale Qualifier Series Rival Monster Truck. Some of the highlights include- * 8 big oil filled shocks * 3 sealed gear diffs * Large monster truck tires * 17mm hexes on wheels * 4 wheel [...]
The latest truck from Team Associated is the SC10.2 Factory Team kit. This is their 2wd short course truck that was originally based off the T4 platform. Now, in the SC10.2 FT version, there are refinements from front to rear. The biggest changes include new Big Bore 12mm shocks, gull wing front a-arms, and Associated’s VTS Slipper Clutch. Part number for [...]
JConcepts has introduced new Titanium Turnbuckles for the Associated line-up of 10th scaled racers. The new Fin turnbuckles are lightweight, ultra-strong, and look very trick. * Original JConcepts design and “Fin” styling * High-grade, machined titanium material * Standardized 3mm thread base * Left and right hand threads with conveniently marked left * Aesthetic jewelry * Part #2225- 6 piece B4 set, retail $40 * Part #2226- [...]
