Search Results for "mst"
Over at Max Speed Technologies they have announced that Pre-Order is now open for their upcoming CFX-W J45C scale off-road kit. Featuring high clearance portal axles and serious scale realism, the CFX-W is ready to take on the toughest of trails. * Wheelbase- 313mm * Front & rear MPA portal axles * TC80 aluminum shocks * Dual slipper clutch * All metal transmission gears * Realistic [...]
Right now the crew over at Max Speed Technology are teasing their new CFX-W J45C Kit. In recent years, MST has really grown in the scale off-road and drift markets. Their upcoming CFX based scale crawler has a classic off-road look and was designed for a high level of trail performance right out of the box. The MST CFX-W J45C has [...]
Depending on perspective, this column is either ten days late, or three days late. Suffice to say, that moving countries tends to put hobby matters quite far down on the to-do list. Making sure kids and some four hundred pounds of luggage gets on and off the plane, does not leave a lot of room for RC related matters. Nor [...]
Recently announced by MST is the MG 40X120-1.9″ Rock Crawling Tire. The MG has a great scale look with large lugs and heavy sidewall detailing. The MG also comes in MST’s soft 30° rubber compound to give your rig incredible levels of raw mechanical grip. The MST MG Rock Crawler Tires have a part number of #831008 and you can hit [...]
New from the crew at MST is the limited edition FXX 2.0 KMW drift car kit. These limited edition units come with a special aluminum plate that displays each car’s serial number. Here are more highlights- * New aluminum motor mount * New steering system & front end geometry * Aluminum alloy ATK front wheel seat * Aluminum alloy MB rear suspension system * New [...]
A couple of days ago MST released a few more details of their upcoming FXX 2.0 KMW, and I am really rather curious about it. Front motor, shaft driven and inboard front suspension, all mounted on a 3.5 mm carbon fibre chassis. The battery and electronics are concentrated towards the rear, which coupled with the front engine should give a pretty [...]
Newly announced by Max Speed Technology is a RTR version of their CMX based TH1 scale off-road truck. The ready to run version of the TH1 makes it quick and easy to hit the trails. * Wheelbase- 267mm * Width- 195mm * CMX scale off-road chassis * Full time shaft driven 4wd * Solid axles front & rear * 26 turn brushed motor * Waterproof steering servo * [...]
The folks over at Max Speed Technology are now teasing the FXX 2.0 KMW Drift Car Kit. The 2.0 is a high-end, rear wheel drive kit, that uses the very latest in drift technology. MST has long been a top drift chassis producer, the FXX 2.0 is sure to be a top level contender. The MST FXX 2.0 KMW is just [...]
Shipping this July from MST RC a RTR version of the Honda Civic TCR-FF on-road car. The Civic is fully licensed by Honda and sports a highly realistic body. Here are the highlights- * Officially licensed by Honda * Wheelbase- 257mm * Width- 184mm * Full bearing set * 12,000 rpm 380 sized motor * XB60 brushed ESC * Caster- Adjustable 5 degree The MST RC Honda Civic [...]
Now being teased by MST is their MTX-1 scale monster truck with a new TH1 Body. The MTX-1 is a scale 2wd monster truck chassis that will soon be available with MST’s new TH1 monster truck body. The new TH1 body has a great old school off-road look that should go over quite well in the scale monster trucking community. We [...]
New from MST (Max Speed Technology) is the MPA Portal Axle Set. Portal style axles are all the rage right now, and for good reason, their extra ground clearance can come in quite handy while rock crawling. * 14mm increase in ground clearance * Upgraded and reinforced CVD axle * Full bearing set * Can be used on front or rear * All metal gears * [...]
New from MST (Max Speed Technology) is the JP1 CFX-W scale rock crawler kit. The big news on the JP1 is that it comes stock with portal style axles for maximum ground clearance. Here are more highlights- * Front & rear portal axles * Aluminum 4-link suspension * Realistic steel frame rails * TC80 aluminum shock set * Dual pad slipper clutch * Planetary gearbox * All [...]
Shipping right now from MST RC is the new J3 CMC RTR Scale Crawler. The J3 has a cool scale body that rides on MST’s popular CMX series chassis. Here is more of the scoop- * 242mm wheelbase * 195mm width * Tire diameter- 90mm * Full time shaft driven 4wd * Locked front & rear axles * Water resistant electronics * 4 link suspension * Heavy duty [...]
Recently announced by Max Speed Technology is the FMX 2.0 drift car. The 2.0 comes in kit form, loaded from nose to tail with carbon fiber to maximize performance. Here are the highlights- * New front suspension system * Incredible amount of steering angle * Two different Ackermann choices * Highly efficient drive system * Next-gen rear suspension * TR56 aluminum shocks Full details for the FMX [...]
Now being teased by Max Speed Technology is the JP1 scale crawler body. The JP1 has some serious scale detailing and is molded from plastic. While not a lot is known at this time, we do know that the body has a wheelbase of 313mm and will also be shipping at some point along with MST’s CFX-W scale crawler chassis. To [...]
