You are browsing the "carbon fiber" tag archive.
Just announced over at Hard Park Crawlers is the 1/24 Dementor SSV2 Builders Kit. This high-end crawling chassis is designed for serious performance, without breaking the bank. Here are the highlights- * 1.5mm thick carbon fiber chassis rails * Front towers shortened for extra servo clearance * Rear towers have been lengthened for added link compatibility * 5 degree skid angle * Updated rear upper [...]
New from the good folks at Team Associated are a bunch of Factory Team Parts for their B7 race buggy kit. The Factory Team upgrades are the some of the same that the Team Associated drivers use on their race buggies to improve durability and speed. Here’s the list- Team Associated Factory Team Upgrades For The B7 #92483 – RC10B7 FT Rear [...]
Over at Team PRP they are now taking pre-orders for their Carbon Fiber Ogre X Chassis Kit for the LMT. The Ogre X was engineered for elite performance, thus helping you take your LMT from mild, to wild. Here are the highlights- * Extremely low center of gravity design * Inverted transmission * Motor and battery re-located to bottom of chassis * STL V2 [...]
Just announced by JC Racing Products is the 1/10th scaled JC10 Carbon Fiber 2WD Buggy Kit. This ultra-high-end vintage style race buggy is perfect for racing, or for collecting. Here are the highlights- * Developed from the RPM long arm RC10 conversions from the late 1980s * Available in two classic finishes – Black and Ivory * 3 different motor plate color options * [...]
New from Injora is their Carbon Fiber Chassis for the Losi Micro-B. One of the latest additions in their Micro-B upgrade lineup, this chassis has a sleek appearance and offers drastically lower weight compared to the stock chassis plate. This chassis is made of carbon fiber and is a direct replacement for the stock Losi Micro-B chassis. Weighing nearly half as [...]
Over at HackFab they have announced a pair of new Carbon Fiber Chassis for the small but mighty Losi Micro-B. Both of their new chassis are made from high quality carbon fiber and designed for use on oval and on-road tracks. Here are the highlights- * Left offset “Oval conversion” chassis * Transverse mounted battery “Omni conversion” chassis * Optimized wheelbase on both [...]
New from Exotek Racing is a Carbon Fiber Battery Brace for the mighty Team Associated B7 race buggy. These carbon parts are a lightweight and trick upgrade for your race buggy. Here are the highlights- * Factory race styling * Heavy duty machined carbon fiber battery cups * Fits – Associated B7 series * Matches the stock geometry * Perfect fit for 4800-6400 shorty packs * [...]
Over at Powerhobby they have some very trick Carbon Fiber Side Skirts for the mighty ARRMA Infraction 6S. The new carbon fiber side skirts not only look gorgeous, but can also help smooth out the airflow on the underside of your car. No matter if you are doing speed runs, or just bashing at the park, these carbon fiber side [...]
Over at WST Racing Products they have announced a new Carbon Fiber Floor Tray for the popular 1/12 Losi NASCAR RTR. This trick looking floor tray makes for the perfect underbody to improve aerodynamics. Here are the highlights- * Flat floor that extends the full width of the body * Helps streamline the aerodynamics of your NASCAR * Cut from 2mm thick carbon [...]
Expected to start shipping in late January is the DSM Off-Road Gen2 Rock Warrior Chassis Kit for the Redcat Ascent & Fusion. This high-end carbon fiber chassis not only looks trick, but is also designed to increase performance. Check out these highlights- * Made from 3mm solid woven carbon fiber * Works with axle mounted servo 4 link setups & stock 3 [...]
New from JConcepts are some very trick -2mm Carbon Fiber Shock Towers for the Team Associated RC10B7 race buggy. These towers not only improve performance, but also give your B7 some serious drip. Here are the highlights- * Original JConcepts styling * Trendy -2mm geometry * Machined from 4mm carbon fiber * Reinforcement ribs added for strength * Improves suspension responsiveness and rigidity * Available in [...]
Over at Pro-Line they have announced Carbon Fiber Shock Tower Braces for ARRMA 3S & MEGA series vehicles. These trick looking carbon fiber tower braces are a lightweight way to increase the strength of your truck. Check out these highlights- * Machined from high quality carbon fiber * Easy bolt-on upgrade * Contoured to tie into bumper mount * Installation hardware included * Fits – [...]
Shipping right now from JConcepts is a Carbon Fiber Rear Shock Tower for the Associated RC10GT. This trick looking upgrade is lighter than stock and is fast and easy to install. Here are the highlights- * Factory Team geometry as well as stock geometry used * Reinforced areas for adding strength in key areas * Made from authentic 3.0mm carbon fiber * Improves rigidity [...]
New over at Powerhobby is a very trick Carbon Fiber Front Shock Tower for the Traxxas Slash/Stampede 4×4. PH’s new shock tower is 4mm in thickness for extra durability, but remains incredibly lightweight due to it’s carbon fiber construction. If you are looking to improve the performance of your Traxxas 4×4 Slash or Stampede, Powerhobby carbon fiber parts a great [...]
Recently announced over at Team Associated are Factory Team Carbon Fiber Shock Towers & Aluminum Shock Standoffs for the RC8B4.1 race buggy. Associated’s Factory Team upgrades are some of the best on the planet and are designed for a perfect fit, as well as a performance increase. Check out these highlights- * Upgrades help to lower center of gravity * Aluminum shock [...]
