You are browsing the "cvd" tag archive.
MIP has just announced 6 new C1 X-Duty CVD Spline Drive Kits for various Axial trucks. These are are truly heavy duty and are made from the highest quality steel. The driveshafts have also been heat tempered for added durability. Once installed, you’ll no longer have to worry about popping a driveshaft while out on the trail, even when powered [...]
Trail driving is a lot of fun, right up to the point when you get in a tight spot, then tag the gas and pop a driveshaft. To help eliminate that lowly walk of shame back to your truck for a replacement shaft, MIP has some new heavy duty driveshafts for the Vaterra K5 Blazer. The X-Duty C-Drive Kit from MIP [...]
The MIP Puck system is pretty slick. They use a puck system where the drive-shafts slide into the out-drives to not only keep wear to a minimum, but to also give your buggy faster acceleration. MIP recently announced their Shiny Puck system for the Associated B5/B5M. The shiny pucks were designed for the more demanding loads of modified racing and their [...]
MIP has a new CVD Center Drive Kit for Axial SCX10s with a 12.3″ wheelbase (which includes the Axial Jeep Rubicon). The new kit does away with the old double set screw design and instead opts for a pin set screw. The drive hubs have also been changed so they no longer make contact with the spur gear cover. * Dual [...]
For all you guys running big power in your Associated SC10 or T4, the crew over at MIP have announced their new Pucks Shiny Drive System for your truck. This set includes a ball diff, but more importantly, includes MIP Pucks for the drive shafts. The Puck system helps keep your drivetrain fresh by not constantly wearing out the outdrives, [...]
If you have an RC4WD Gelande II then you have probably already found out that the plastic stock driveshafts can’t take much abuse. Our friends over at MIP also know they are a problem so they have announced a new X-Duty C-Drive Kit for the truck. The MIP units are heavy duty and made from steel, making them much stronger [...]
If you are a stock class racer looking to go fast with your new Associated B5/B5M, the crew over at MIP have some new Bi-Metal CVDs for your consideration. This CVD set is very light to reduce rotating mass, while they also come with MIP’s Puck system so your outdrives will last much longer. The MIP set is 40% lighter [...]
The previous hop-ups we performed on the Vaterra Halix didn’t take much elbow grease. Installing pre-mounted wheels & tires can take as little as 5 minutes, while installing a pre-painted body might take less than half an hour. On the flip side of the coin, installing MIP CVDs on the Halix might be the most time consuming hop-up to be [...]
For all you Serpent buggy owners, MIP has announced their Puck CVD System for the SRX-2. The Puck Shiny System comes with steel CVDs to handle mod power, plus the replaceable pucks will keep your outdrives & CV bones from wearing out so quickly. Oh ya, they look sharp and help with quicker acceleration too. The part number is #14125, [...]
All you Vaterra Halix owners can now rejoice, the crew over at MIP have designed some ultra-durable CVDs for your truck. The units that MIP designed for the Halix feature splined telescoping shafts that should handle a lot more power than stock without breakage. * Heat treated, all metal design * Grease and thread gel included * 100% made in the USA The part [...]
The latest product from MIP is one of their Shiny Puck CVD drive systems for Schumacher KR and SV2 buggies. The Shiny CVDs are made from steel to be more durable for modified motor use, and MIP Pucks are said to provide smoother acceleration and better handling out of corners. * 100% made in the USA * Two sets of holes in [...]
Remember the long hours spent over on One18th looking at thread after thread of ubered-out HPI Micro RS4s? Yes, the BigSquid crew has been there too. Then the micro market died out, One18th went away, and so did aftermarket interest in the littlest HPI touring car. HPI has recently released some new Micro RS4s and now we are starting to see [...]
If you are looking to shave some weight and rotating mass MIP has announced Race Duty CVDs for a bunch of Traxxxas vehicles. The lighter weight of the Race Duty CVDs can help your truck accelerate faster. The Race Duty series CVDs are recommended for no higher than 2S use and are not recommended for bashing. * #13265 for Traxxas electric [...]
If you want the toughest driveshafts in the business you have to look no further than MIP. Now MIP has center driveshaft kits for the Axial Wraith and SCX10. The stock plastic driveshafts can twist or break, the heavy duty MIP units are built to take punishment. Some of their key features include- * Spline drive technology * Made from tough [...]
MIP continues to unleash cool new products, their latest is Race Duty Aluminum CVD’s for select Traxxas vehicles. The Race Duty CVD bones are made out of aluminum, thus saving weight and reducing rotating mass. Less rotating mass yields quicker acceleration and longer run-times, something everyone is looking for. Steel is used for the out-drives and axles for increased durability. [...]
