You are browsing the "driveshafts" tag archive.
Beef up your Axial Wraith or Yeti with new Scale Steel Driveshafts from SSD RC. The new driveshafts are CNC machined from hardened steel to not break or twist, even under the hardest of trail conditions. They were designed to keep a scale look to them, while precision cut splines keep their action smooth. A 50 degree operating angle is [...]
The Axial Yeti is tough but its plastic rear driveshaft can be prone to breakage under heavy use. If you have been twisting/breaking the stocker, MIP have announced a new X-Dutry C-Drive Kit. For the ultimate in durability, the MIP unit is made from heat treated steel and uses their spline drive technology. The part number is #14390 and it has [...]
Trail driving is a lot of fun, right up to the point when you get in a tight spot, then tag the gas and pop a driveshaft. To help eliminate that lowly walk of shame back to your truck for a replacement shaft, MIP has some new heavy duty driveshafts for the Vaterra K5 Blazer. The X-Duty C-Drive Kit from MIP [...]
The MIP Puck system is pretty slick. They use a puck system where the drive-shafts slide into the out-drives to not only keep wear to a minimum, but to also give your buggy faster acceleration. MIP recently announced their Shiny Puck system for the Associated B5/B5M. The shiny pucks were designed for the more demanding loads of modified racing and their [...]
MIP has a new CVD Center Drive Kit for Axial SCX10s with a 12.3″ wheelbase (which includes the Axial Jeep Rubicon). The new kit does away with the old double set screw design and instead opts for a pin set screw. The drive hubs have also been changed so they no longer make contact with the spur gear cover. * Dual [...]
If you have an RC4WD Gelande II then you have probably already found out that the plastic stock driveshafts can’t take much abuse. Our friends over at MIP also know they are a problem so they have announced a new X-Duty C-Drive Kit for the truck. The MIP units are heavy duty and made from steel, making them much stronger [...]
If you are a stock class racer looking to go fast with your new Associated B5/B5M, the crew over at MIP have some new Bi-Metal CVDs for your consideration. This CVD set is very light to reduce rotating mass, while they also come with MIP’s Puck system so your outdrives will last much longer. The MIP set is 40% lighter [...]
For all you Serpent buggy owners, MIP has announced their Puck CVD System for the SRX-2. The Puck Shiny System comes with steel CVDs to handle mod power, plus the replaceable pucks will keep your outdrives & CV bones from wearing out so quickly. Oh ya, they look sharp and help with quicker acceleration too. The part number is #14125, [...]
Looking to beef up the drivetrain on your Dromida 18th scaler? Well you are in luck with Dromida’s Aluminum Drivetrain Kit. The kit comes with everything you need to bulletproof your drivetrain, and it does so in style with blue anodizing. The kit includes- * Spur gear with o-rings & springs * Center drive shaft * Four dog bones * Four axles The part [...]
All you Vaterra Halix owners can now rejoice, the crew over at MIP have designed some ultra-durable CVDs for your truck. The units that MIP designed for the Halix feature splined telescoping shafts that should handle a lot more power than stock without breakage. * Heat treated, all metal design * Grease and thread gel included * 100% made in the USA The part [...]
RC4WD has a sweet new Hardened Steel Driveshaft Set for all you Tamiya Bruiser owners. The driveshafts are made from hardened steel to be extra tough and they were designed to look just like their full scale counterparts. * Weight- 2.75oz * Shaft end hole size- .2″ * Shaft outer diameter- .3″ * Short shaft travel distance- 3.15″-3.74″ * Long shaft travel distance- 5.11″-5.7″ The part [...]
“Vaterra Cogging How can I get rid of all cogging from my halix vaterra? 2s Lipo Aspen Sam” Cubby- Yo hey Aspen Sam, what’s up and I hope you’ve been bashing the heck out of your Vaterra Halix. While it is still a very new model it has become a favorite among the BigSquidRC Bash Crew. The Halix comes geared somewhat tall out of [...]
Need to beef up the driveline of your Axial Wraith or SCX10? The good folks over at STRC have just announced high quality universal driveshafts for the popular Axial off-road machines. The ST Racing Concepts universals are made from the ground up to be extra tough. They are made from carbon-steel, heat treated, and CNC machined to make sure they can [...]
If you are looking to shave some weight and rotating mass MIP has announced Race Duty CVDs for a bunch of Traxxxas vehicles. The lighter weight of the Race Duty CVDs can help your truck accelerate faster. The Race Duty series CVDs are recommended for no higher than 2S use and are not recommended for bashing. * #13265 for Traxxas electric [...]
If you want the toughest driveshafts in the business you have to look no further than MIP. Now MIP has center driveshaft kits for the Axial Wraith and SCX10. The stock plastic driveshafts can twist or break, the heavy duty MIP units are built to take punishment. Some of their key features include- * Spline drive technology * Made from tough [...]
