For Bashers, By Bashers!

You are browsing the "Exotek Racing" tag archive.

Exotek Heavy Duty Steering Set Losi 22S

Exotek Heavy Duty Steering Set for the Losi 22S

Coming soon from Exotek is a Heavy Duty Steering Set for the Losi 22S Drag Car. This high-end steering set is made from durable aluminum and comes with a full bearing set. Here are the rest of the highlights- * Made from CNC machined 7075 aluminum * Anodized black * Helps to increase steering precision * Additional 4 bearings in steering drag link * Crush [...]

Read More...

Exotek Lightweight Alloy Idler Gear Losi 22S

Exotek Lightweight Alloy Idler Gear for the Losi 22S

New over at Exotek Racing is a Lightweight Alloy Idler Gear for the Losi 22S drag car. When drag racing, reducing rotating mass can lead to quicker trips down the lane. The new idler from Exotek is super lightweight, yet quite durable. Here are the highlights- * Fits Losi 22S as well as TLR 22 3.0 w/ stand up transmission * Made [...]

Read More...

Exotek Extra Long Carbon Fiber Wheelie Bar Set Losi 22S

Exotek Extra Long Carbon Fiber Wheelie Bar Set for the 22S

New from Exotek is an Extra Long Carbon Fiber Wheelie Bar for the Losi 22S. To help you put down the fastest possible time at the track, the Exotek crew has designed a high-end wheelie bar to put all that brushless power to the ground. Check out these highlights- * Fits Losi 22S drag car * Extends from 9.5″ up to 12″ * [...]

Read More...

Exotek Racing Lightweight Drag Motor Plate Losi 22S

Exotek Racing Lightweight Drag Motor Plate for the Losi 22S

New from Exotek Racing is a very trick Lightweight Drag Motor Plate for the Losi 22S. Made from CNC machined aluminum, this vented motor plate is a high-end upgrade for your drag machine. Here are the highlights- * Aggressive slots for less weight & to help lower motor temps * Slots also help cool down the inner slipper parts * Weight- 14 grams [...]

Read More...

Exotek Racing MK3 Turbine Slipper

Exotek Racing MK3 Turbine Slipper for AE DR10 & TLR 22

New from Exotek Racing is a MK3 Turbine Slipper w/ 3 Pads for the Associated DR10, as well as the TLR 22. The turbine design helps to keep the slipper pads cool while you go for 132 foot glory. Here are the highlights- * Allows for quicker slipper cool downs between runs * Provides added consistency * Increases air flow over the slipper [...]

Read More...

Exotek Front Drag Racing Bumper Set AE B6

Exotek Front Drag Racing Bumper Set for the AE B6

New over at Exotek Racing is a Front Drag Racing Bumper Set for Team Associated B6 series buggies. Made from high-end materials, the front drag bumper is durable, yet designed for serious performance. Check out these highlights- * Made from carbon fiber and an aluminum alloy * Heavy duty alloy and carbon fiber mounting base * Extra wide high density foam bumper * 3 [...]

Read More...

Exotek Racing Heavy Duty Aluminum Rear Arm Mount Associated DR10

Exotek Racing Heavy Duty Aluminum Rear Arm Mount for the DR1…

Coming soon from Exotek Racing is a Heavy Duty Aluminum Rear Arm Mount for the hot selling Associated DR10 no-prep drag car. The upgrade rear arm mount can help bulletproof your race machine, while also adding a touch of bling. Here are the highlights- * Comes with 0°, -1°, -2°, and – 3° machined Delrin inserts * Fits DR10, SR10 and similar [...]

Read More...

Exotek Heavy Duty Aluminum Steering Hubs Associated DR10

Exotek Heavy Duty Aluminum Steering Hubs for the DR10

New over at Exotek Racing are Heavy Duty Aluminum Steering Hubs for the hot selling Associated DR10 no-prep drag racer. Designed for precision and durability, the steering hubs also look trick. Here are the highlights- * Made from CNC machined 7075 aluminum * Fits DR10 and DB10 series vehicles * Provides extra stability and precision * Helps to reduce bump steer by lowering ball [...]

Read More...

Exotek Aluminum Heavy Duty Rear Hub Set Tekno EB410.2

Exotek Racing Aluminum Heavy Duty Rear Hub Set for the Tekno…

Just announced by Exotek Racing is an Aluminum Heavy Duty Rear Hub Set for the Tekno EB410.2 race buggy. These rear hubs have been designed for serious durability, while also improving performance. Here are the highlights- * Fits – Tekno EB410.2 & ET410.2 * Switches ball stud to upright orientation for easier roll center adjustments * Matches stock geometry * Hubs are omnidirectional * Designed [...]

Read More...

Exotek DR10 TLR 22 MK2 Turbine Slipper Clutch

New Associated DR10 Upgrades from Exotek

New over at Exotek Racing are a pair of upgrades for the Associated DR10 no-prep drag car. Both upgrades were designed to make your no-prep drag car more durable, as well as quicker past the line. The first new item is a DR10 Heavy Duty Steel Top Shaft. The steel top shaft was designed for extreme use, but still weighs in [...]

Read More...

Exotek RC Heavy Duty Center Bulkhead Set HB D819 E819

Exotek Heavy Duty Center Bulkhead Set for the HB D819/E819

Over at Exotek Racing they have just dropped a new Heavy Duty Center Bulkhead Set for the HB Racing D819/E819 race buggies. This HD bulkhead set is made from high quality 7075 aluminum and features 2 color anodizing. * Fits HB Racing D819, E819, RS & E817 series of buggies and trucks * Sturdy aluminum construction maintains proper gear mesh * Uses stock [...]

Read More...

Exotek RC Eliminator Heavy Duty Bumper Set TLR 22

Exotek Eliminator Heavy Duty Bumper Set for the TLR 22

Just announced by Exotek Racing is an Eliminator Heavy Duty Bumper Set for the TLR 22 buggy. Many hobbyists have been choosing the TLR 22 to convert for no-prep drag racing. When doing the conversion, you’ll need several parts, one of which being a high quality front bumper set-up. The Eliminator Heavy Duty Front Bumper was designed to be lightweight, [...]

Read More...

Exotek Racing DR10 Alloy Gearbox

Exotek Racing's DR10 Alloy Gear Box for the Team Associated …

Exotek Racing has released a new aluminum option part for the Team Associated DR10 and DB10. The DR10 Alloy Gear Box (#2010) will add style and protection to the transmission of your DR10 kit build and also serves as a great upgrade for an RTR. Made from machined aluminum and featuring a black finish, this gearbox will not only help armor [...]

Read More...

Exotek Racing Aluminum Traxxas Slash Pro Steering Set

Exotek Racing Aluminum Slash Pro Steering Set

The crew from Exotek Racing has announced a new Aluminum Slash Pro Steering Set. This heavy duty unit is not only much stronger than the stock parts, but can also help make your steering more precise. Here are the highlights- * Fits Traxxas 2wd Slash, Bandit, and street eliminators * Incredibly smooth, precise, and durable * Includes full set of ball bearings & [...]

Read More...

Exotek Racing Wheelie Bar 2 RC No Prep

Exotek Racing Wheelie Bar 2

Coming soon from Exotek is the Wheelie Bar 2. Exotek’s new wheelie bar was created to convert their previous single wheel bar, into a two wheel design. Here are the highlights- * For use with Exotek wheelie bars * Comes with “Y” bar, 1 wheel, and 1 wheel mount * Made from carbon fiber * Easy to install * Highly adjustable The Exotek Racing Wheelie [...]

Read More...

Reviews