You are browsing the "servos" tag archive.
Futaba have released three new High Voltage servos, of which two should be of interest to the car and truck guys. The new S9352HV and S9353HV servos both have the same s/0.06 speed and humungous 306 oz/in torque, but the difference is the S9353HV boasts a full metal case for extra durability. The BLS256HV servo is intended for helicopter rudder use, as it significantly lighter [...]
Savox has a bunch of new servos that are out now or are coming down the pipe soon, sometime around the first of the year. No matter what kind of servo you’re looking for, Savox probably has a new one for you. From budget minded to super high end brushless and high voltage. They even have a [...]
Everybody loves some new Hitec servos! They had a ton of new ones on display here at iHobby 2011. Everything from wing servos to crazy giant 1/5 scale servos. The HSB-9380TH is a brushless servo that produces 486 oz. of torque on 7.4V and runs at 0.15 sec/60. That’s just crazy! This thing would rock [...]
I was recently visiting with the Futaba folks last week and had a chance to hold all of these in my hands and check them out. The S9353HV (FUTM0621) seemed like a bashers dream with the ALL metal case. So no more breaking off the screw tabs on a hard landing.. this case can survive anything! They all had metal [...]
Need some torque? Futaba has you covered with their new S9353HV Servo! 306 oz-in at 7.4V is a ton! Want more? How about .06 second speed? Awesome, right? This guy should be available later in August and will be ideal for your bad boy 1/8 scale off road vehicle or crawler. Make sure you [...]
Oh snap! You know we love waterproof stuff around here. It looks like the guys over at Hitec have some more fuel for our fire with a pair of new waterproof servos! The HS-646WP and HS-5646WP both feature metal gears, dual ball bearings, 3-pole cored ferrite motors, 2S lipo capability, and most importantly, the industry’s first IP67-Rated [...]
The peeps over at Schumacher have had all kinds of new stuff rolling out over the past two weeks. Their latest release are some new Graupner/GM High-Voltage Brushless Servos! HBS for short, these servos combine the peformance you get from a brushless motor with lots of power to really kick some tail. These servos can actually be [...]
You saw it here first! The guys from Savox have tipped us off on a new Savox SA-1283SG Super Torque Steel Gear Digital Servo they are planning to release in the next few weeks. This servo looks just totally bad@$$! Super high 12bit resolution with steel gears, coreless motor, full aluminum case, all while remaining [...]
Hitec does one thing really well, release a lot of new servos. Here’s their latest, the HS-7235MH and HS-7245MH. Both of these are high voltage, coreless mini servos suitable for smaller scale cars and trucks as well as light planes and helis. At 6 volts the 7235 is rated at 50 oz-in with a transit speed of 0.09 second and [...]
We don’t have an official press release yet, but these new Hitec servos is making us drool! These are the HSB-9380 for Ultra Torque, HSB-9370 for multi purpose use, and the HSB-9360 for high speed! What’s got us drooling is the fact that they have Neu-Castle brushless motors on the inside! Now look who’s drooling! We will post more info when [...]
Savox SB-750TG Digital Servo Review From: Savox USA Review by Cubby. Last week I had the pleasure of reviewing one of the most uber servos on the market, the Hitec 7950, this week I’m testing a servo from a little known company called Savox. Savox may be little known to the masses, but they make a lot of servos (and brushless [...]
Hitec HS-7950TH Review From: Hitec RCD Direct Link: Hitec HS-7950TH Review by Cubby.So you drive an uber 8th scale or monster truck, and you are the type of person that only puts the best into your baby. There are dozens of choices in high end servos, but you don’t know which one to buy. Well, here’s Cubby’s quick and dirty review of [...]
Hitec has decided that your RTR’s servo sucks. So they’re offering you two new, affordable sport servos. The HS-5495BH features Hitec’s “Karbonite” composite plastic gear set. It puts out a respectable 89 oz/in at a transit time of 0.17 second when powered by 6 volts, or 104 oz/in at 0.15 second when juiced with 7.4 volts. The HS-5496MH [...]
Just saw over on the Savox website that they have a new Rebate program where you can trade in any old servo towards one of their own and get $20 off!! How sweet is that?! All you need to do is add one of their qualified servo’s to your shopping cart, use the code servotradein and place the [...]
Hitec quite possibly wins the best product demonstration of the IHobby Expo. Their new(ish) waterproof servos, the HS-5646WP and HS-5086WP, were operating during the entire run of the show completely submerged. The HS-5646WP is capable of nearly 100 oz/in of torque at a speed of .26 sec/60°, while the HS-5086WP is able to do about 40 oz/in at .18 sec/60º. [...]
